Rotary furnace is a machine mainly used in the cement industry to calcine cement clinker, refractory materials, ceramic industry to calcine granular and powdered materials, and to dry various raw materials in the aforementioned industries. Let's learn about the operating steps of the rotary furnace together with the editor
Before starting the machine, it is necessary to check that the gas butterfly valve and damper are in a closed state, and that the scale is at the zero position. And check if the connecting rod of the gas butterfly valve is worn and if the screws are loose. Use soapy water to check for air leakage in the gas pipeline and valves. Close the pipeline drain valve and check that the fan triangle belt is not damaged, the tightness is moderate, and the bearing box and rotary motor are not short of oil. Open the cooling water inlet and outlet valves of the fan and check if the pressure of the cooling water is normal. Start the machine, set the initial temperature of the temperature controller to 80 degrees Celsius, connect the power to the burner, open the main valve and combustion valve of the gas outdoor pipeline, rotate the remote ignition switch to the ignition position for ignition, and observe that the interval between ignition times should not be less than 5 minutes. To determine whether the ignition was successful, it is strictly prohibited to conduct a second ignition without a short interval or identifying the cause of a failed ignition If you would like to learn more about rotary furnaces, please feel free to contact Xianyang Ceramic Research and Design Institute Co., Ltd. It has been engaged in the research and development and production of rotary furnaces and other related products for many years. It has a certain reputation in the fields of experimental rotary furnaces, vapor deposition furnaces, and lithium iron phosphate calciners, and is a well-known manufacturer of silicon carbon negative electrode coating equipment in Shaanxi. Welcome customers to visit and consult
